Looking for a rod case is apparently difficult: Does anyone have any suggestions for a good, affordable rod travel/storage case (preferably with room for the reel) for a 6'6" one-piece...

FS Digest

Does anyone have any suggestions for a good, affordable rod travel/storage case (preferably with room for the reel) for a 6'6" one-piece spinner? I'm finding it next to impossible. Thanks in advance!

--
by DCS30

Ron620DVS Loc: Guntersville Alabama

FS Digest wrote:

Does anyone have any suggestions for a good, affordable rod travel/storage case (preferably with room for the reel) for a 6'6" one-piece spinner? I'm finding it next to impossible. Thanks in advance!

--
by DCS30

******************************************************************************************
🦞

Please click on links for additional information, Thank You

https://www.amazon.com/Fishing-Rod-Cases-Tubes/b?ie=UTF8&node=3409221

https://www.amazon.com/Guide-Gear-Five-Reel-Case/dp/B000F899O0/ref=sr_1_2?_encoding=UTF8&c=ts&dchild=1&keywords=Fishing+Rod+Cases+%26+Tubes&qid=1619882209&s=hunting-fishing&sr=1-2&ts_id=3409221

https://www.amazon.com/Lixada-Fishing-Portable-Folding-Protective/dp/B0813JV2LN/ref=sr_1_3?_encoding=UTF8&c=ts&dchild=1&keywords=Fishing+Rod+Cases+%26+Tubes&qid=1619882669&s=hunting-fishing&sr=1-3&ts_id=3409221

They many different choices, good luck...

Ron620DVS🎣🐟🐠🐸🦞

.

Shutupandfish Loc: Transplanted roots back to Wyoming

FS Digest wrote:

Does anyone have any suggestions for a good, affordable rod travel/storage case (preferably with room for the reel) for a 6'6" one-piece spinner? I'm finding it next to impossible. Thanks in advance!

--
by DCS30

Just remember to measure the whole rod and handle, may not be same as written. To make sure case will fit

OJdidit Loc: Oak Creek Wisconsin

FS Digest wrote:

Does anyone have any suggestions for a good, affordable rod travel/storage case (preferably with room for the reel) for a 6'6" one-piece spinner? I'm finding it next to impossible. Thanks in advance!

--
by DCS30

Are you looking for a bag or a hard case?
If a zippered bag will do The Sportsman’s Guide has one which is faux wool lined and will handle up to 5 rods to 7’6” for about $30

OldBassGuy Loc: Temecula, CA

We got a piece of PVC, just longer than the rods we were using. Put a plug in both ends and drilled two holes in the center and put rope through for handle to carry. Made many trips to Mexico with it, and it still works 40 years later.

bself2 Loc: va beach

FS Digest wrote:

Does anyone have any suggestions for a good, affordable rod travel/storage case (preferably with room for the reel) for a 6'6" one-piece spinner? I'm finding it next to impossible. Thanks in advance!

--
by DCS30

I use PVC with threads and caps from Home Depot. Baggage handler proof
bself2

Jeffchow88 Loc: San Francisco

eBay, Bass Pro Shops/Cabela’s, etc.
Making your own with PVC easy.

If you’re planning to fly , check with the airline. I’ve made my own multi-piece rods just for those occasions.

trlittle Loc: Chico CA

bself2 wrote:

I use PVC with threads and caps from Home Depot. Baggage handler proof
bself2

That is also what are use

tominsdtn Loc: Soddy Daisy TN

OldBassGuy wrote:

We got a piece of PVC, just longer than the rods we were using. Put a plug in both ends and drilled two holes in the center and put rope through for handle to carry. Made many trips to Mexico with it, and it still works 40 years later.

Also have also done this. They last forever.

RuffplayOR57 Loc: Klamath Falls, OR

FS Digest wrote:

Does anyone have any suggestions for a good, affordable rod travel/storage case (preferably with room for the reel) for a 6'6" one-piece spinner? I'm finding it next to impossible. Thanks in advance!

--
by DCS30

6” PV with glue end cap on one end and a screw end cap on the other.