Fishing Stage - Forum
Home Active Topics Newest Pictures Search Login Register
Main
Outboard Motor Question
Jun 10, 2021 10:24:29   #
ReelT Loc: Montana
 
Mornin'!

Recognizing that this is a fishing forum, I hope I am not out of line asking a question about my outboard...

I have a Honda 90 with a "flush port connector" that does not flush. When I hook a garden hose up to the connector, the water pressure blows the small rubber connecting hose off of the engine. I can't get any water from the garden hose into the engine using this method. The manual says it is the way to wash out the motor without having to run the engine.
It seems the flush system is blocked, but where to start looking?

BTW, I currently use "muffs" to wash out the motor, but would really like to have this other option.
Thanks in advance for any information you might have on this problem!

Tight Lines everyone!
Randy





Reply
Jun 10, 2021 11:10:04   #
DALE KEIRNS Loc: OHIO
 
Contact the Honda dealer, they can give you the best advice!

Reply
Jun 10, 2021 11:20:03   #
Whitey Loc: Southeast ohio
 
ReelT wrote:
Mornin'!

Recognizing that this is a fishing forum, I hope I am not out of line asking a question about my outboard...

I have a Honda 90 with a "flush port connector" that does not flush. When I hook a garden hose up to the connector, the water pressure blows the small rubber connecting hose off of the engine. I can't get any water from the garden hose into the engine using this method. The manual says it is the way to wash out the motor without having to run the engine.
It seems the flush system is blocked, but where to start looking?

BTW, I currently use "muffs" to wash out the motor, but would really like to have this other option.
Thanks in advance for any information you might have on this problem!

Tight Lines everyone!
Randy
Mornin'! br br Recognizing that this is a fishing... (show quote)

I would check where that hose connects to the motor itself and make sure it is not blocked there. then I would contact a dealer or get on YouTube and see if you can find some good information on there. Good luck man keep us posted what you find might help someone else down the road

Reply
 
 
Jun 10, 2021 11:27:51   #
Ron620DVS Loc: Guntersville Alabama
 
ReelT wrote:
Mornin'!

Recognizing that this is a fishing forum, I hope I am not out of line asking a question about my outboard...

I have a Honda 90 with a "flush port connector" that does not flush. When I hook a garden hose up to the connector, the water pressure blows the small rubber connecting hose off of the engine. I can't get any water from the garden hose into the engine using this method. The manual says it is the way to wash out the motor without having to run the engine.
It seems the flush system is blocked, but where to start looking?

BTW, I currently use "muffs" to wash out the motor, but would really like to have this other option.
Thanks in advance for any information you might have on this problem!

Tight Lines everyone!
Randy
Mornin'! br br Recognizing that this is a fishing... (show quote)


*******************************************************************************************


.
🎣🦞

Please clicks on links for additional information, Thank You.



http://www.marineengine.com/boat-forum/showthread.php?415076-Flush-Port-Leak



https://www.thehulltruth.com/boating-forum/816022-flush-port-connector-outboard-engine.html?styleid=3



https://forums.iboats.com/threads/honda-225-flush-port-connector-came-off.495987/



https://www.justanswer.com/boat/7aces-hooked-flush-port-connector-yamaha-115-4stroke.html





Ron620DVS🎣🐟🐠🐸🦞



🦞


.

Reply
Jun 10, 2021 13:21:54   #
Justoldjim Loc: JUNCTION CITY, OR.
 
ReelT wrote:
Mornin'!

Recognizing that this is a fishing forum, I hope I am not out of line asking a question about my outboard...

I have a Honda 90 with a "flush port connector" that does not flush. When I hook a garden hose up to the connector, the water pressure blows the small rubber connecting hose off of the engine. I can't get any water from the garden hose into the engine using this method. The manual says it is the way to wash out the motor without having to run the engine.
It seems the flush system is blocked, but where to start looking?

BTW, I currently use "muffs" to wash out the motor, but would really like to have this other option.
Thanks in advance for any information you might have on this problem!

Tight Lines everyone!
Randy
Mornin'! br br Recognizing that this is a fishing... (show quote)


My Honda dealer told me not to use cthe muffs said the water would cavitate and not cool correctly

Reply
Jun 10, 2021 15:00:09   #
ReelT Loc: Montana
 
Thanks Whitey!
I did as you suggested and found the flush valve, spring and cavity completely choked with salt and scale.
πŸ™ In the process of trying to clean the ports and hoses now. It appears to be a very involved process. Might not get back to you for while.

I bought the boat used. It had been run in the ocean and it looks like it wasn’t washed out like it needed …

Thanks for your response and suggestions!

Reply
Jun 10, 2021 15:01:08   #
ReelT Loc: Montana
 
Thanks Ron!
I will be using these!

Reply
 
 
Jun 10, 2021 15:09:22   #
ReelT Loc: Montana
 
Thanks Justoldjim!

I fish primarily in fresh water but
I run in salt water once a year for about a month (salmon fishing). Rinsing the engine so the thermostats open and everything gets flushed is the big concern about only using the cold water flush port connector when I’m at the coast.

Muffs have been my β€œgo to” so far.
Any suggestions about cleaning out the salt water?

Thanks again.
Randy

Reply
Jun 10, 2021 17:39:38   #
Fredfish Loc: Prospect CT.
 
ReelT wrote:
Thanks Justoldjim!

I fish primarily in fresh water but
I run in salt water once a year for about a month (salmon fishing). Rinsing the engine so the thermostats open and everything gets flushed is the big concern about only using the cold water flush port connector when I’m at the coast.

Muffs have been my β€œgo to” so far.
Any suggestions about cleaning out the salt water?

Thanks again.
Randy

Hi Randy, when I used to run my outboards in the salt, I used to flush them out with Hot water at the end of the season. If you have a washing machine you have a hot water hookup. Salt dissolves quicker in hot than cold water. Good luck.

Reply
Jun 10, 2021 22:53:43   #
ReelT Loc: Montana
 
Whitey wrote:
I would check where that hose connects to the motor itself and make sure it is not blocked there. then I would contact a dealer or get on YouTube and see if you can find some good information on there. Good luck man keep us posted what you find might help someone else down the road



Update on the motor:

Found a great video on cooling system repair and maintenance. Gave me confidence to dig in. Great video:

https://www.youtube.com/watch?v=2Wr18cuyq2M&t=51s

I was able to check small connector hoses and found on completely plugged. Used the video suggestion of using an old guitar string to ream out the small port and then used my compressor to blow out the rest. It opened up the water flow!
I hooked up the hose to the flush port connector, and for the first time it actually started working. I let it run for 2 hours. Hope it will continue to improve the water flow and I can keep the salt out of the small ports!

Thanks for the suggestions - it lead to the solution!

Randy

Reply
Jun 11, 2021 08:26:57   #
Whitey Loc: Southeast ohio
 
ReelT wrote:
Update on the motor:

Found a great video on cooling system repair and maintenance. Gave me confidence to dig in. Great video:

https://www.youtube.com/watch?v=2Wr18cuyq2M&t=51s

I was able to check small connector hoses and found on completely plugged. Used the video suggestion of using an old guitar string to ream out the small port and then used my compressor to blow out the rest. It opened up the water flow!
I hooked up the hose to the flush port connector, and for the first time it actually started working. I let it run for 2 hours. Hope it will continue to improve the water flow and I can keep the salt out of the small ports!

Thanks for the suggestions - it lead to the solution!

Randy
Update on the motor: br br Found a great video on... (show quote)

That's great Randy πŸ˜πŸ‘

Reply
 
 
Jun 11, 2021 12:27:04   #
Ricky Loc: Columbia City, Oregon
 
Fred fish,
Thanks for the hot water truck. Makes since I will be using it in the future.

Reply
Jun 11, 2021 13:55:40   #
PBFisherman
 
Have you tried opening the picket only a little you may have too much water pressure, just a thought

Reply
Jun 11, 2021 14:24:49   #
Fredfish Loc: Prospect CT.
 
Ricky wrote:
Fred fish,
Thanks for the hot water truck. Makes since I will be using it in the future.


You're welcome Ricky. Bought my 25hp Merc new in 1990,and ran it in saltwater only for 11yrs. I'm still using it now in freshwater, and its never been apart, except to change the impeller every few years. No corrosion anywhere.

Reply
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Main
FishingStage.com - Forum
Copyright 2018-2024 IDF International Technologies, Inc.